Tel:0086-373-5858796
Email:inquiry@kcrane.com
- Description
- Parameters
1. Rail mounted container gantry crane brief introduction
Rail mounted container gantry cranes (RMG) are special equipment to remove, load and unload containers. Running and moving in the yard, it has the advantage of high production efficiency and fine maneuverability. RMG has tractor trolley and standard trolley two models. RMG is powered by cable drum. At the same time, diesel generating set is equipped for conditions when the power is of for the crane moves to another yard.
Key words: Rail mounted container gantry crane, container crane, RMG crane
Environment:
1.The power source is 3-phase alternating current, rated frequency is 50HZ, rated voltage is 380V.
2.The working environment temperature ranges from -20~+45℃ and the relative humidity is no lower than 95% (withdrew).
3.In-service, the wind speed should be no higher than 20m/s; out-of-service, the wind speed should be no higher than 44m/s.
4.The group classification of the crane is A6 or A7.
5.The gradient of crane traveling floor should be less than 1% and part of that should be no more than 3%.
6.The crane which has the special requirement for working conditions, can be manufactured following the contracts.
2.RMG Technical Parameters
▪Load capacity: 35-50T
▪Span:35m
▪Lifting height: 16m
▪Working duty: A6
▪Load and unload of goods: 20’ 40’ container
▪Hoisting speed: 0-10m/min
▪Steel track recommended:P43, QU100
▪Power source: 380V, 50HZ,3-Phase
3.TMG Feature:
▪The energy saving and feedback device system
▪Intelligent inspection and diagnosis system, better pre-alarm and analysis fault and prevent the failure
▪Separate the electric room from trolley, thus reduce the load trolley
▪Intelligent stop and start, advanced automatic correction system
▪Smart cabin, intelligent monitoring and management system, with full view of goods
Rail mounted container gantry crane
50tJMQ rail mounted container gantry crane(upper turning four-rope anti-swing)
Load capacity |
t |
50 |
||||||
---|---|---|---|---|---|---|---|---|
Load capacity under hook |
t |
40 |
||||||
Span |
m |
18 |
22 |
26 |
30 |
35 |
40 |
|
Working system |
A6 |
|||||||
Lifting height under hook |
m |
11 |
||||||
Speed |
Lifting |
m/min |
Full load 12; no load 24 |
|||||
Trolley travlling |
m/min |
Full load 68; no load 90 |
||||||
Crane traveling |
m/min |
Full load 60; no load 100 |
||||||
Slewing |
r/min |
1.4 |
||||||
Motor |
Lifting |
Type/kw |
YZP280M-8/2×55 |
|||||
Trolley traveling |
YZPE160M-4/4×11 |
|||||||
Crane traveling |
YZPE160L-4/8×15 |
|||||||
Slewing |
YZPE132M-4/4×3.7 |
|||||||
Main dimension (mm) |
LX |
8000 |
||||||
D |
7500 |
|||||||
BQ |
9310 |
|||||||
L1 |
13500 |
|||||||
L2 |
13500 |
|||||||
S1 |
7500 |
|||||||
S2 |
7500 |
|||||||
Weight (t) |
Trolley |
t |
78(include hook) |
|||||
Total weight |
t |
262 |
271 |
280 |
291 |
313 |
336 |
|
Max wheel pressure |
KN |
314 |
317 |
319 |
325 |
331 |
337 |
|
Crane rail recommended |
Kg/m |
50kg/m (QU100) |
||||||
Power supply |
3-phase AC 50HZ 380V |
50t JMQ rail mounted container gantry crane (upper turning eight-rope anti-swing)
Load capacity |
t |
50 |
||||||
---|---|---|---|---|---|---|---|---|
Load capacity under hook |
t |
40 |
||||||
Span |
m |
18 |
22 |
26 |
30 |
35 |
40 |
|
Working system |
A7 |
|||||||
Lifting height under hook |
m |
12.5 |
||||||
Speed |
Lifting |
m/min |
Full load 15; no load 30 |
|||||
Trolley travelling |
m/min |
Full load 60; no load 90 |
||||||
Crane travelling |
m/min |
Full load 55; no load 90 |
||||||
Slewing |
r/min |
1.5 |
||||||
Motor |
Lifting |
Type/kw |
YZP355M2-8/200 |
|||||
Trolley travelling |
YZPE160M-4/4×11 |
|||||||
Crane travelling |
YZPE160M-4/8×22 |
|||||||
Slewing |
YZPE112M-4/4×4 |
|||||||
Main dimension (mm) |
LX |
14500 |
||||||
D |
8500 |
|||||||
BQ |
15810 |
|||||||
L1 |
14000 |
|||||||
L2 |
14000 |
|||||||
S1 |
7500 |
|||||||
S2 |
7500 |
|||||||
Weight (t) |
Trolley |
t |
93(include hook) |
|||||
Total weight |
t |
292 |
303 |
317 |
332 |
348 |
369 |
|
Max wheel pressure |
KN |
358 |
360 |
367 |
375 |
383 |
394 |
|
Crane rail recommended |
Kg/m |
50kg/m (QU100) |
||||||
Power supply |
3-phase AC 50HZ 380V |
60t JMQ rail mounted container gantry crane (lower turning rigid anti-swing)
Load capacity |
t |
60 |
||||||
---|---|---|---|---|---|---|---|---|
Load capacity under hook |
t |
40 |
||||||
Span |
m |
18 |
22 |
26 |
30 |
35 |
40 |
|
Working system |
A6 |
|||||||
Lifting height under hook |
m |
12.5 |
||||||
Speed |
Lifting |
m/min |
Full load 12.6; no load 24 |
|||||
Trolley traveling |
m/min |
Full load 62.5; no load 90 |
||||||
Crane traveling |
m/min |
Full load 66; no load 100 |
||||||
Slewing |
r/min |
1 |
||||||
Motor |
Lifting |
Type/kw |
YZP315S2-8/2×75 |
|||||
Trolley traveling |
YZP160L-6/2×11 |
|||||||
Crane traveling |
YZP160L-6/8×11 |
|||||||
Main dimension (mm) |
LX |
14000 |
||||||
BQ |
15310 |
|||||||
L1 |
11500 |
|||||||
L2 |
13000 |
|||||||
S1 |
7500 |
|||||||
S2 |
7500 |
|||||||
Weight (t) |
Trolley |
t |
64(include hook) |
|||||
Total weight |
t |
251 |
260 |
269 |
280 |
302 |
325 |
|
Max wheel pressure |
KN |
294 |
296 |
298 |
301 |
309 |
316 |
|
Crane rail recommended |
Kg/m |
50kg/m (QU100) |
||||||
Power supply |
3-phase AC 50HZ 380V |
53t JMQ rail mounted container gantry crane (lower turning four-rope anti-swing)
Load capacity |
t |
53.5 |
||||||
---|---|---|---|---|---|---|---|---|
Load capacity under hook |
t |
40 |
||||||
Span |
m |
18 |
22 |
26 |
30 |
35 |
40 |
|
Working system |
A6 |
|||||||
Lifting height under hook |
m |
10.5 |
||||||
Speed |
Lifting |
m/min |
Full load 10.5; no load 20 |
|||||
Trolley traveling |
m/min |
5.34~53.4 |
||||||
Crane traveling |
m/min |
5.5~55 |
||||||
Slewing |
r/min |
1.5 |
||||||
Motor |
Lifting |
Type/kw |
YZP355M-8/110 |
|||||
Trolley travelling |
YZE160M-4/2×7.5 |
|||||||
Crane travelling |
YZE160M-4/8×7.5 |
|||||||
Main dimension (mm) |
LX |
8000 |
||||||
BQ |
9210 |
|||||||
L1 |
11500 |
|||||||
L2 |
11500 |
|||||||
S1 |
7500 |
|||||||
S2 |
7500 |
|||||||
Weight (t) |
Trolley |
t |
7500 |
|||||
Total weight |
t |
179 |
187 |
196 |
204 |
221 |
239 |
|
Max wheel pressure |
KN |
217 |
219 |
222 |
225 |
232 |
241 |
|
Crane rail recommended |
Kg/m |
50kg/m (QU100) |
||||||
Power supply |
3-phase AC 50HZ 380V |